Back to Guides

Dev Services Overview

Quarkus supports the automatic provisioning of unconfigured services in development and test mode. We refer to this capability as Dev Services. From a developer’s perspective this means that if you include an extension and don’t configure it then Quarkus will automatically start the relevant service (usually using Testcontainers behind the scenes) and wire up your application to use this service.

All this functionality is part of the Quarkus deployment modules, so does not affect the production application in any way. If you want to disable all Dev Services you can use the quarkus.devservices.enabled=false config property, although in most cases this is not necessary as simply configuring the service will result in the Dev Service being disabled automatically.

Note that the default startup timeout is 60s, if this is not enough you can increase it with the quarkus.devservices.timeout property.

This page lists all the Dev Services that Quarkus supports.

In order to use Dev Services you will generally need a working Docker environment (remote environments are supported). If you don’t have Docker installed you will need to configure your services normally.

AMQP

The AMQP Dev Service will be enabled when the quarkus-smallrye-reactive-messaging-amqp extension is present in your application, and the broker address has not been explicitly configured. More information can be found in the AMQP Dev Services Guide.

Configuration property fixed at build time - All other configuration properties are overridable at runtime

Configuration property

Type

Default

quarkus.amqp.devservices.enabled

If Dev Services for AMQP has been explicitly enabled or disabled. Dev Services are generally enabled by default, unless there is an existing configuration present. For AMQP, Dev Services starts a broker unless amqp-host or amqp-port are set or if all the Reactive Messaging AMQP channel are configured with host or port.

Environment variable: QUARKUS_AMQP_DEVSERVICES_ENABLED

Show more

boolean

quarkus.amqp.devservices.port

Optional fixed port the dev service will listen to.

If not defined, the port will be chosen randomly.

Environment variable: QUARKUS_AMQP_DEVSERVICES_PORT

Show more

int

quarkus.amqp.devservices.image-name

The image to use. Note that only ActiveMQ Artemis images are supported. Specifically, the image repository must end with artemiscloud/activemq-artemis-broker.

Check the activemq-artemis-broker on Quay page to find the available versions.

Environment variable: QUARKUS_AMQP_DEVSERVICES_IMAGE_NAME

Show more

string

quay.io/artemiscloud/activemq-artemis-broker:1.0.22

quarkus.amqp.devservices.extra-args

The value of the AMQ_EXTRA_ARGS environment variable to pass to the container. For ActiveMQ Artemis Broker ⇐ 1.0.21, set this property to --no-autotune --mapped --no-fsync --relax-jolokia --http-host 0.0.0.0

Environment variable: QUARKUS_AMQP_DEVSERVICES_EXTRA_ARGS

Show more

string

--no-autotune --mapped --no-fsync --relax-jolokia

quarkus.amqp.devservices.shared

Indicates if the AMQP broker managed by Quarkus Dev Services is shared. When shared, Quarkus looks for running containers using label-based service discovery. If a matching container is found, it is used, and so a second one is not started. Otherwise, Dev Services for AMQP starts a new container.

The discovery uses the quarkus-dev-service-amqp label. The value is configured using the service-name property.

Container sharing is only used in dev mode.

Environment variable: QUARKUS_AMQP_DEVSERVICES_SHARED

Show more

boolean

true

quarkus.amqp.devservices.service-name

The value of the quarkus-dev-service-aqmp label attached to the started container. This property is used when shared is set to true. In this case, before starting a container, Dev Services for AMQP looks for a container with the quarkus-dev-service-amqp label set to the configured value. If found, it will use this container instead of starting a new one. Otherwise, it starts a new container with the quarkus-dev-service-amqp label set to the specified value.

This property is used when you need multiple shared AMQP brokers.

Environment variable: QUARKUS_AMQP_DEVSERVICES_SERVICE_NAME

Show more

string

amqp

quarkus.amqp.devservices.container-env

Environment variables that are passed to the container.

Environment variable: QUARKUS_AMQP_DEVSERVICES_CONTAINER_ENV

Show more

Map<String,String>

Apicurio Registry

The Apicurio Dev Service will be enabled when the quarkus-apicurio-registry-avro extension is present in your application, and it’s address has not been explicitly configured. More information can be found in the Apicurio Registry Dev Services Guide.

Configuration property fixed at build time - All other configuration properties are overridable at runtime

Configuration property

Type

Default

quarkus.apicurio-registry.devservices.enabled

If Dev Services for Apicurio Registry has been explicitly enabled or disabled. Dev Services are generally enabled by default, unless there is an existing configuration present. For Apicurio Registry, Dev Services starts a registry unless mp.messaging.connector.smallrye-kafka.apicurio.registry.url or mp.messaging.connector.smallrye-kafka.schema.registry.url is set.

Environment variable: QUARKUS_APICURIO_REGISTRY_DEVSERVICES_ENABLED

Show more

boolean

quarkus.apicurio-registry.devservices.port

Optional fixed port the dev service will listen to.

If not defined, the port will be chosen randomly.

Environment variable: QUARKUS_APICURIO_REGISTRY_DEVSERVICES_PORT

Show more

int

quarkus.apicurio-registry.devservices.image-name

The Apicurio Registry image to use. Note that only Apicurio Registry 2.x images are supported. Specifically, the image repository must end with apicurio/apicurio-registry-mem.

Environment variable: QUARKUS_APICURIO_REGISTRY_DEVSERVICES_IMAGE_NAME

Show more

string

quay.io/apicurio/apicurio-registry-mem:2.4.2.Final

quarkus.apicurio-registry.devservices.shared

Indicates if the Apicurio Registry instance managed by Quarkus Dev Services is shared. When shared, Quarkus looks for running containers using label-based service discovery. If a matching container is found, it is used, and so a second one is not started. Otherwise, Dev Services for Apicurio Registry starts a new container.

The discovery uses the quarkus-dev-service-apicurio-registry label. The value is configured using the service-name property.

Container sharing is only used in dev mode.

Environment variable: QUARKUS_APICURIO_REGISTRY_DEVSERVICES_SHARED

Show more

boolean

true

quarkus.apicurio-registry.devservices.service-name

The value of the quarkus-dev-service-apicurio-registry label attached to the started container. This property is used when shared is set to true. In this case, before starting a container, Dev Services for Apicurio Registry looks for a container with the quarkus-dev-service-apicurio-registry label set to the configured value. If found, it will use this container instead of starting a new one. Otherwise, it starts a new container with the quarkus-dev-service-apicurio-registry label set to the specified value.

This property is used when you need multiple shared Apicurio Registry instances.

Environment variable: QUARKUS_APICURIO_REGISTRY_DEVSERVICES_SERVICE_NAME

Show more

string

apicurio-registry

quarkus.apicurio-registry.devservices.container-env

Environment variables that are passed to the container.

Environment variable: QUARKUS_APICURIO_REGISTRY_DEVSERVICES_CONTAINER_ENV

Show more

Map<String,String>

Databases

The database Dev Services will be enabled when a reactive or JDBC datasource extension is present in the application, and the database URL has not been configured. More information can be found in the Databases Dev Services Guide.

Quarkus provides Dev Services for all databases it supports. Most of these are run in a container, except H2 and Derby which are run in-process. Dev Services are supported for both JDBC and reactive drivers.

Those relational databases that are running in a container are started using Testcontainers and support "reusable instances"; this implies that if you add the property testcontainers.reuse.enable=true in your Testcontainers configuration file, a property file named .testcontainers.properties in your user home, then the databases will not be stopped aggressively after each run, and can be reused.

N.B. if you opt in for this feature, Quarkus will not reset the state of the database between runs unless you explicitly configure it to.

Configuration property fixed at build time - All other configuration properties are overridable at runtime

Configuration property

Type

Default

quarkus.datasource.devservices.enabled

quarkus.datasource."datasource-name".devservices.enabled

If DevServices has been explicitly enabled or disabled. DevServices is generally enabled by default unless an existing configuration is present. When DevServices is enabled, Quarkus will attempt to automatically configure and start a database when running in Dev or Test mode.

Environment variable: QUARKUS_DATASOURCE_DEVSERVICES_ENABLED

Show more

boolean

quarkus.datasource.devservices.image-name

quarkus.datasource."datasource-name".devservices.image-name

The container image name for container-based DevServices providers. This has no effect if the provider is not a container-based database, such as H2 or Derby.

Environment variable: QUARKUS_DATASOURCE_DEVSERVICES_IMAGE_NAME

Show more

string

quarkus.datasource.devservices.container-env

quarkus.datasource."datasource-name".devservices.container-env

Environment variables that are passed to the container.

Environment variable: QUARKUS_DATASOURCE_DEVSERVICES_CONTAINER_ENV

Show more

Map<String,String>

quarkus.datasource.devservices.container-properties

quarkus.datasource."datasource-name".devservices.container-properties

Generic properties that are passed for additional container configuration.

Properties defined here are database-specific and are interpreted specifically in each database dev service implementation.

Environment variable: QUARKUS_DATASOURCE_DEVSERVICES_CONTAINER_PROPERTIES

Show more

Map<String,String>

quarkus.datasource.devservices.properties

quarkus.datasource."datasource-name".devservices.properties

Generic properties that are added to the database connection URL.

Environment variable: QUARKUS_DATASOURCE_DEVSERVICES_PROPERTIES

Show more

Map<String,String>

quarkus.datasource.devservices.port

quarkus.datasource."datasource-name".devservices.port

Optional fixed port the dev service will listen to.

If not defined, the port will be chosen randomly.

Environment variable: QUARKUS_DATASOURCE_DEVSERVICES_PORT

Show more

int

quarkus.datasource.devservices.command

quarkus.datasource."datasource-name".devservices.command

The container start command to use for container-based DevServices providers. This has no effect if the provider is not a container-based database, such as H2 or Derby.

Environment variable: QUARKUS_DATASOURCE_DEVSERVICES_COMMAND

Show more

string

quarkus.datasource.devservices.db-name

quarkus.datasource."datasource-name".devservices.db-name

The database name to use if this Dev Service supports overriding it.

Environment variable: QUARKUS_DATASOURCE_DEVSERVICES_DB_NAME

Show more

string

quarkus.datasource.devservices.username

quarkus.datasource."datasource-name".devservices.username

The username to use if this Dev Service supports overriding it.

Environment variable: QUARKUS_DATASOURCE_DEVSERVICES_USERNAME

Show more

string

quarkus.datasource.devservices.password

quarkus.datasource."datasource-name".devservices.password

The password to use if this Dev Service supports overriding it.

Environment variable: QUARKUS_DATASOURCE_DEVSERVICES_PASSWORD

Show more

string

quarkus.datasource.devservices.init-script-path

quarkus.datasource."datasource-name".devservices.init-script-path

The path to a SQL script to be loaded from the classpath and applied to the Dev Service database. This has no effect if the provider is not a container-based database, such as H2 or Derby.

Environment variable: QUARKUS_DATASOURCE_DEVSERVICES_INIT_SCRIPT_PATH

Show more

string

quarkus.datasource.devservices.volumes

quarkus.datasource."datasource-name".devservices.volumes

The volumes to be mapped to the container. The map key corresponds to the host location; the map value is the container location. If the host location starts with "classpath:", the mapping loads the resource from the classpath with read-only permission. When using a file system location, the volume will be generated with read-write permission, potentially leading to data loss or modification in your file system. This has no effect if the provider is not a container-based database, such as H2 or Derby.

Environment variable: QUARKUS_DATASOURCE_DEVSERVICES_VOLUMES

Show more

Map<String,String>

Kafka

The Kafka Dev Service will be enabled when the quarkus-kafka-client extension is present in your application, and the broker address has not been explicitly configured. More information can be found in the Kafka Dev Services Guide.

Configuration property fixed at build time - All other configuration properties are overridable at runtime

Configuration property

Type

Default

quarkus.kafka.devservices.enabled

If Dev Services for Kafka has been explicitly enabled or disabled. Dev Services are generally enabled by default, unless there is an existing configuration present. For Kafka, Dev Services starts a broker unless kafka.bootstrap.servers is set or if all the Reactive Messaging Kafka channel are configured with a bootstrap.servers.

Environment variable: QUARKUS_KAFKA_DEVSERVICES_ENABLED

Show more

boolean

quarkus.kafka.devservices.port

Optional fixed port the dev service will listen to.

If not defined, the port will be chosen randomly.

Environment variable: QUARKUS_KAFKA_DEVSERVICES_PORT

Show more

int

quarkus.kafka.devservices.provider

Kafka dev service container type.

Redpanda, Strimzi and kafka-native container providers are supported. Default is redpanda.

For Redpanda: See https://vectorized.io/docs/quick-start-docker/ and https://hub.docker.com/r/vectorized/redpanda

For Strimzi: See https://github.com/strimzi/test-container and https://quay.io/repository/strimzi-test-container/test-container

For Kafka Native: See https://github.com/ozangunalp/kafka-native and https://quay.io/repository/ogunalp/kafka-native

Note that Strimzi and Kafka Native images are launched in Kraft mode.

Environment variable: QUARKUS_KAFKA_DEVSERVICES_PROVIDER

Show more

redpanda, strimzi, kafka-native

redpanda

quarkus.kafka.devservices.image-name

The Kafka container image to use.

Dependent on the provider.

Environment variable: QUARKUS_KAFKA_DEVSERVICES_IMAGE_NAME

Show more

string

quarkus.kafka.devservices.shared

Indicates if the Kafka broker managed by Quarkus Dev Services is shared. When shared, Quarkus looks for running containers using label-based service discovery. If a matching container is found, it is used, and so a second one is not started. Otherwise, Dev Services for Kafka starts a new container.

The discovery uses the quarkus-dev-service-kafka label. The value is configured using the service-name property.

Container sharing is only used in dev mode.

Environment variable: QUARKUS_KAFKA_DEVSERVICES_SHARED

Show more

boolean

true

quarkus.kafka.devservices.service-name

The value of the quarkus-dev-service-kafka label attached to the started container. This property is used when shared is set to true. In this case, before starting a container, Dev Services for Kafka looks for a container with the quarkus-dev-service-kafka label set to the configured value. If found, it will use this container instead of starting a new one. Otherwise, it starts a new container with the quarkus-dev-service-kafka label set to the specified value.

This property is used when you need multiple shared Kafka brokers.

Environment variable: QUARKUS_KAFKA_DEVSERVICES_SERVICE_NAME

Show more

string

kafka

quarkus.kafka.devservices.topic-partitions-timeout

Timeout for admin client calls used in topic creation.

Defaults to 2 seconds.

Environment variable: QUARKUS_KAFKA_DEVSERVICES_TOPIC_PARTITIONS_TIMEOUT

Show more

Duration

2S

quarkus.kafka.devservices.redpanda.transaction-enabled

Enables transaction support. Also enables the producer idempotence. Find more info about Red Panda transaction support on https://vectorized.io/blog/fast-transactions/. Notice that KIP-447 (producer scalability for exactly once semantic) and KIP-360 (Improve reliability of idempotent/transactional producer) are not supported.

Environment variable: QUARKUS_KAFKA_DEVSERVICES_REDPANDA_TRANSACTION_ENABLED

Show more

boolean

true

quarkus.kafka.devservices.topic-partitions

The topic-partition pairs to create in the Dev Services Kafka broker. After the broker is started, given topics with partitions are created, skipping already existing topics. For example, quarkus.kafka.devservices.topic-partitions.test=2 will create a topic named test with 2 partitions.

The topic creation will not try to re-partition existing topics with different number of partitions.

Environment variable: QUARKUS_KAFKA_DEVSERVICES_TOPIC_PARTITIONS

Show more

Map<String,Integer>

quarkus.kafka.devservices.container-env

Environment variables that are passed to the container.

Environment variable: QUARKUS_KAFKA_DEVSERVICES_CONTAINER_ENV

Show more

Map<String,String>
About the Duration format

To write duration values, use the standard java.time.Duration format. See the Duration#parse() javadoc for more information.

You can also use a simplified format, starting with a number:

  • If the value is only a number, it represents time in seconds.

  • If the value is a number followed by ms, it represents time in milliseconds.

In other cases, the simplified format is translated to the java.time.Duration format for parsing:

  • If the value is a number followed by h, m, or s, it is prefixed with PT.

  • If the value is a number followed by d, it is prefixed with P.

Keycloak

The Keycloak Dev Service will be enabled when the quarkus-oidc extension is present in your application, and the server address has not been explicitly configured. More information can be found in the OIDC Dev Services Guide.

Configuration property fixed at build time - All other configuration properties are overridable at runtime

Configuration property

Type

Default

quarkus.keycloak.devservices.enabled

If DevServices has been explicitly enabled or disabled.

When DevServices is enabled Quarkus will attempt to automatically configure and start Keycloak when running in Dev or Test mode and when Docker is running.

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_ENABLED

Show more

boolean

true

quarkus.keycloak.devservices.image-name

The container image name to use, for container-based DevServices providers. Image with a Quarkus based distribution is used by default. Image with a WildFly based distribution can be selected instead, for example: quay.io/keycloak/keycloak:19.0.3-legacy.

Note Keycloak Quarkus and Keycloak WildFly images are initialized differently. By default, Dev Services for Keycloak will assume it is a Keycloak Quarkus image if the image version does not end with a '-legacy' string. Set 'quarkus.keycloak.devservices.keycloak-x-image' to override this check.

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_IMAGE_NAME

Show more

string

quay.io/keycloak/keycloak:23.0.0

quarkus.keycloak.devservices.keycloak-x-image

If Keycloak-X image is used. By default, Dev Services for Keycloak will assume a Keycloak-X image is used if the image name contains a 'keycloak-x' string. Set 'quarkus.keycloak.devservices.keycloak-x-image' to override this check which may be necessary if you build custom Keycloak-X or Keycloak images. You do not need to set this property if the default check works.

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_KEYCLOAK_X_IMAGE

Show more

boolean

quarkus.keycloak.devservices.shared

Indicates if the Keycloak container managed by Quarkus Dev Services is shared. When shared, Quarkus looks for running containers using label-based service discovery. If a matching container is found, it is used, and so a second one is not started. Otherwise, Dev Services for Keycloak starts a new container.

The discovery uses the quarkus-dev-service-label label. The value is configured using the service-name property.

Container sharing is only used in dev mode.

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_SHARED

Show more

boolean

true

quarkus.keycloak.devservices.service-name

The value of the quarkus-dev-service-keycloak label attached to the started container. This property is used when shared is set to true. In this case, before starting a container, Dev Services for Keycloak looks for a container with the quarkus-dev-service-keycloak label set to the configured value. If found, it will use this container instead of starting a new one. Otherwise, it starts a new container with the quarkus-dev-service-keycloak label set to the specified value.

Container sharing is only used in dev mode.

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_SERVICE_NAME

Show more

string

quarkus

quarkus.keycloak.devservices.realm-path

The comma-separated list of class or file system paths to Keycloak realm files which will be used to initialize Keycloak. The first value in this list will be used to initialize default tenant connection properties.

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_REALM_PATH

Show more

list of string

quarkus.keycloak.devservices.java-opts

The JAVA_OPTS passed to the keycloak JVM

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_JAVA_OPTS

Show more

string

quarkus.keycloak.devservices.show-logs

Show Keycloak log messages with a "Keycloak:" prefix.

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_SHOW_LOGS

Show more

boolean

false

quarkus.keycloak.devservices.start-command

Keycloak start command. Use this property to experiment with Keycloak start options, see https://www.keycloak.org/server/all-config. Note it will be ignored when loading legacy Keycloak WildFly images.

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_START_COMMAND

Show more

string

quarkus.keycloak.devservices.realm-name

The Keycloak realm name. This property will be used to create the realm if the realm file pointed to by the realm-path property does not exist, default value is quarkus in this case. If the realm file pointed to by the realm-path property exists then it is still recommended to set this property for Dev Services for Keycloak to avoid parsing the realm file to determine the realm name.

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_REALM_NAME

Show more

string

quarkus.keycloak.devservices.create-realm

Indicates if the Keycloak realm has to be created when the realm file pointed to by the realm-path property does not exist. Disable it if you’d like to create a realm using Keycloak Administration Console or Keycloak Admin API from io.quarkus.test.common.QuarkusTestResourceLifecycleManager.

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_CREATE_REALM

Show more

boolean

true

quarkus.keycloak.devservices.port

Optional fixed port the dev service will listen to.

If not defined, the port will be chosen randomly.

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_PORT

Show more

int

quarkus.keycloak.devservices.users

The Keycloak users map containing the username and password pairs. If this map is empty then two users, 'alice' and 'bob' with the passwords matching their names will be created. This property will be used to create the Keycloak users if the realm file pointed to by the realm-path property does not exist.

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_USERS

Show more

Map<String,String>

quarkus.keycloak.devservices.roles

The Keycloak user roles. If this map is empty then a user named 'alice' will get 'admin' and 'user' roles and all other users will get a 'user' role. This property will be used to create the Keycloak roles if the realm file pointed to by the realm-path property does not exist.

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_ROLES

Show more

Map<String,List<String>>

quarkus.keycloak.devservices.container-env

Environment variables that are passed to the container.

Environment variable: QUARKUS_KEYCLOAK_DEVSERVICES_CONTAINER_ENV

Show more

Map<String,String>

Kubernetes

The Kubernetes Dev Service will be enabled when kubernetes-client extension is present in your application, and the API server address has not been explicitly configured. More information can be found in the Kubernetes Dev Services Guide.

Configuration property fixed at build time - All other configuration properties are overridable at runtime

Dev Services

Type

Default

quarkus.kubernetes-client.devservices.enabled

If Dev Services for Kubernetes should be used. (default to true) If this is true and kubernetes client is not configured then a kubernetes cluster will be started and will be used.

Environment variable: QUARKUS_KUBERNETES_CLIENT_DEVSERVICES_ENABLED

Show more

boolean

true

quarkus.kubernetes-client.devservices.api-version

The kubernetes api server version to use. If not set, Dev Services for Kubernetes will use the latest supported version of the given flavor. see https://github.com/dajudge/kindcontainer/blob/master/k8s-versions.json

Environment variable: QUARKUS_KUBERNETES_CLIENT_DEVSERVICES_API_VERSION

Show more

string

quarkus.kubernetes-client.devservices.flavor

The flavor to use (kind, k3s or api-only). Default to api-only.

Environment variable: QUARKUS_KUBERNETES_CLIENT_DEVSERVICES_FLAVOR

Show more

kind, k3s, api-only

api-only

quarkus.kubernetes-client.devservices.override-kubeconfig

By default, if a kubeconfig is found, Dev Services for Kubernetes will not start. Set this to true to override the kubeconfig config.

Environment variable: QUARKUS_KUBERNETES_CLIENT_DEVSERVICES_OVERRIDE_KUBECONFIG

Show more

boolean

false

quarkus.kubernetes-client.devservices.shared

Indicates if the Kubernetes cluster managed by Quarkus Dev Services is shared. When shared, Quarkus looks for running containers using label-based service discovery. If a matching container is found, it is used, and so a second one is not started. Otherwise, Dev Services for Kubernetes starts a new container.

The discovery uses the quarkus-dev-service-kubernetes label. The value is configured using the service-name property.

Container sharing is only used in dev mode.

Environment variable: QUARKUS_KUBERNETES_CLIENT_DEVSERVICES_SHARED

Show more

boolean

true

quarkus.kubernetes-client.devservices.service-name

The value of the quarkus-dev-service-kubernetes label attached to the started container. This property is used when shared is set to true. In this case, before starting a container, Dev Services for Kubernetes looks for a container with the quarkus-dev-service-kubernetes label set to the configured value. If found, it will use this container instead of starting a new one. Otherwise, it starts a new container with the quarkus-dev-service-kubernetes label set to the specified value.

This property is used when you need multiple shared Kubernetes clusters.

Environment variable: QUARKUS_KUBERNETES_CLIENT_DEVSERVICES_SERVICE_NAME

Show more

string

kubernetes

quarkus.kubernetes-client.devservices.container-env

Environment variables that are passed to the container.

Environment variable: QUARKUS_KUBERNETES_CLIENT_DEVSERVICES_CONTAINER_ENV

Show more

Map<String,String>

MongoDB

The MongoDB Dev Service will be enabled when the quarkus-mongodb-client extension is present in your application, and the server address has not been explicitly configured. More information can be found in the MongoDB Guide.

Configuration property fixed at build time - All other configuration properties are overridable at runtime

Configuration property

Type

Default

quarkus.mongodb.devservices.enabled

If DevServices has been explicitly enabled or disabled. DevServices is generally enabled by default, unless there is an existing configuration present. When DevServices is enabled Quarkus will attempt to automatically configure and start a database when running in Dev or Test mode.

Environment variable: QUARKUS_MONGODB_DEVSERVICES_ENABLED

Show more

boolean

quarkus.mongodb.devservices.image-name

The container image name to use, for container based DevServices providers.

Environment variable: QUARKUS_MONGODB_DEVSERVICES_IMAGE_NAME

Show more

string

quarkus.mongodb.devservices.port

Optional fixed port the dev service will listen to.

If not defined, the port will be chosen randomly.

Environment variable: QUARKUS_MONGODB_DEVSERVICES_PORT

Show more

int

quarkus.mongodb.devservices.properties

Generic properties that are added to the connection URL.

Environment variable: QUARKUS_MONGODB_DEVSERVICES_PROPERTIES

Show more

Map<String,String>

quarkus.mongodb.devservices.container-env

Environment variables that are passed to the container.

Environment variable: QUARKUS_MONGODB_DEVSERVICES_CONTAINER_ENV

Show more

Map<String,String>

RabbitMQ

The RabbitMQ Dev Service will be enabled when the quarkus-smallrye-reactive-messaging-rabbitmq extension is present in your application, and the broker address has not been explicitly configured. More information can be found in the RabbitMQ Dev Services Guide.

Configuration property fixed at build time - All other configuration properties are overridable at runtime

Configuration property

Type

Default

quarkus.rabbitmq.devservices.enabled

If Dev Services for RabbitMQ has been explicitly enabled or disabled. Dev Services are generally enabled by default, unless there is an existing configuration present. For RabbitMQ, Dev Services starts a broker unless rabbitmq-host or rabbitmq-port are set or if all the Reactive Messaging RabbitMQ channel are configured with host or port.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_ENABLED

Show more

boolean

quarkus.rabbitmq.devservices.port

Optional fixed port the dev service will listen to.

If not defined, the port will be chosen randomly.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_PORT

Show more

int

quarkus.rabbitmq.devservices.http-port

Optional fixed port for the RabbitMQ management plugin.

If not defined, the port will be chosen randomly.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_HTTP_PORT

Show more

int

quarkus.rabbitmq.devservices.image-name

The image to use. Note that only official RabbitMQ images are supported. Specifically, the image repository must end with rabbitmq.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_IMAGE_NAME

Show more

string

rabbitmq:3.12-management

quarkus.rabbitmq.devservices.shared

Indicates if the RabbitMQ broker managed by Quarkus Dev Services is shared. When shared, Quarkus looks for running containers using label-based service discovery. If a matching container is found, it is used, and so a second one is not started. Otherwise, Dev Services for RabbitMQ starts a new container.

The discovery uses the quarkus-dev-service-rabbitmq label. The value is configured using the service-name property.

Container sharing is only used in dev mode.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_SHARED

Show more

boolean

true

quarkus.rabbitmq.devservices.service-name

The value of the quarkus-dev-service-rabbitmq label attached to the started container. This property is used when shared is set to true. In this case, before starting a container, Dev Services for RabbitMQ looks for a container with the quarkus-dev-service-rabbitmq label set to the configured value. If found, it will use this container instead of starting a new one. Otherwise, it starts a new container with the quarkus-dev-service-rabbitmq label set to the specified value.

This property is used when you need multiple shared RabbitMQ brokers.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_SERVICE_NAME

Show more

string

rabbitmq

quarkus.rabbitmq.devservices.exchanges."exchanges".type

Type of exchange: direct, topic, headers, fanout, etc.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_EXCHANGES__EXCHANGES__TYPE

Show more

string

direct

quarkus.rabbitmq.devservices.exchanges."exchanges".auto-delete

Should the exchange be deleted when all queues are finished using it?

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_EXCHANGES__EXCHANGES__AUTO_DELETE

Show more

boolean

false

quarkus.rabbitmq.devservices.exchanges."exchanges".durable

Should the exchange remain after restarts?

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_EXCHANGES__EXCHANGES__DURABLE

Show more

boolean

false

quarkus.rabbitmq.devservices.exchanges."exchanges".arguments

Extra arguments for the exchange definition.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_EXCHANGES__EXCHANGES__ARGUMENTS

Show more

Map<String,String>

quarkus.rabbitmq.devservices.queues."queues".auto-delete

Should the queue be deleted when all consumers are finished using it?

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_QUEUES__QUEUES__AUTO_DELETE

Show more

boolean

false

quarkus.rabbitmq.devservices.queues."queues".durable

Should the queue remain after restarts?

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_QUEUES__QUEUES__DURABLE

Show more

boolean

false

quarkus.rabbitmq.devservices.queues."queues".arguments

Extra arguments for the queue definition.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_QUEUES__QUEUES__ARGUMENTS

Show more

Map<String,String>

quarkus.rabbitmq.devservices.bindings."bindings".source

Source exchange to bind to. Defaults to name of binding instance.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_BINDINGS__BINDINGS__SOURCE

Show more

string

quarkus.rabbitmq.devservices.bindings."bindings".routing-key

Routing key specification for the source exchange.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_BINDINGS__BINDINGS__ROUTING_KEY

Show more

string

#

quarkus.rabbitmq.devservices.bindings."bindings".destination

Destination exchange or queue to bind to. Defaults to name of binding instance.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_BINDINGS__BINDINGS__DESTINATION

Show more

string

quarkus.rabbitmq.devservices.bindings."bindings".destination-type

Destination type for binding: queue, exchange, etc.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_BINDINGS__BINDINGS__DESTINATION_TYPE

Show more

string

queue

quarkus.rabbitmq.devservices.bindings."bindings".arguments

Extra arguments for the binding definition.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_BINDINGS__BINDINGS__ARGUMENTS

Show more

Map<String,String>

quarkus.rabbitmq.devservices.container-env

Environment variables that are passed to the container.

Environment variable: QUARKUS_RABBITMQ_DEVSERVICES_CONTAINER_ENV

Show more

Map<String,String>

Redis

The Redis Dev Service will be enabled when the quarkus-redis-client extension is present in your application, and the server address has not been explicitly configured. More information can be found in the Redis Dev Services Guide.

Configuration property fixed at build time - All other configuration properties are overridable at runtime

Configuration property

Type

Default

quarkus.redis.devservices.enabled

If DevServices has been explicitly enabled or disabled. DevServices is generally enabled by default, unless there is an existing configuration present.

When DevServices is enabled Quarkus will attempt to automatically configure and start a database when running in Dev or Test mode and when Docker is running.

Environment variable: QUARKUS_REDIS_DEVSERVICES_ENABLED

Show more

boolean

true

quarkus.redis.devservices.image-name

The container image name to use, for container based DevServices providers. If you want to use Redis Stack modules (bloom, graph, search…​), use: redis/redis-stack:latest.

Environment variable: QUARKUS_REDIS_DEVSERVICES_IMAGE_NAME

Show more

string

quarkus.redis.devservices.port

Optional fixed port the dev service will listen to.

If not defined, the port will be chosen randomly.

Environment variable: QUARKUS_REDIS_DEVSERVICES_PORT

Show more

int

quarkus.redis.devservices.shared

Indicates if the Redis server managed by Quarkus Dev Services is shared. When shared, Quarkus looks for running containers using label-based service discovery. If a matching container is found, it is used, and so a second one is not started. Otherwise, Dev Services for Redis starts a new container.

The discovery uses the quarkus-dev-service-redis label. The value is configured using the service-name property.

Container sharing is only used in dev mode.

Environment variable: QUARKUS_REDIS_DEVSERVICES_SHARED

Show more

boolean

true

quarkus.redis.devservices.service-name

The value of the quarkus-dev-service-redis label attached to the started container. This property is used when shared is set to true. In this case, before starting a container, Dev Services for Redis looks for a container with the quarkus-dev-service-redis label set to the configured value. If found, it will use this container instead of starting a new one. Otherwise, it starts a new container with the quarkus-dev-service-redis label set to the specified value.

This property is used when you need multiple shared Redis servers.

Environment variable: QUARKUS_REDIS_DEVSERVICES_SERVICE_NAME

Show more

string

redis

quarkus.redis.devservices.container-env

Environment variables that are passed to the container.

Environment variable: QUARKUS_REDIS_DEVSERVICES_CONTAINER_ENV

Show more

Map<String,String>

quarkus.redis."additional-redis-clients".devservices.enabled

If DevServices has been explicitly enabled or disabled. DevServices is generally enabled by default, unless there is an existing configuration present.

When DevServices is enabled Quarkus will attempt to automatically configure and start a database when running in Dev or Test mode and when Docker is running.

Environment variable: QUARKUS_REDIS__ADDITIONAL_REDIS_CLIENTS__DEVSERVICES_ENABLED

Show more

boolean

true

quarkus.redis."additional-redis-clients".devservices.image-name

The container image name to use, for container based DevServices providers. If you want to use Redis Stack modules (bloom, graph, search…​), use: redis/redis-stack:latest.

Environment variable: QUARKUS_REDIS__ADDITIONAL_REDIS_CLIENTS__DEVSERVICES_IMAGE_NAME

Show more

string

quarkus.redis."additional-redis-clients".devservices.port

Optional fixed port the dev service will listen to.

If not defined, the port will be chosen randomly.

Environment variable: QUARKUS_REDIS__ADDITIONAL_REDIS_CLIENTS__DEVSERVICES_PORT

Show more

int

quarkus.redis."additional-redis-clients".devservices.shared

Indicates if the Redis server managed by Quarkus Dev Services is shared. When shared, Quarkus looks for running containers using label-based service discovery. If a matching container is found, it is used, and so a second one is not started. Otherwise, Dev Services for Redis starts a new container.

The discovery uses the quarkus-dev-service-redis label. The value is configured using the service-name property.

Container sharing is only used in dev mode.

Environment variable: QUARKUS_REDIS__ADDITIONAL_REDIS_CLIENTS__DEVSERVICES_SHARED

Show more

boolean

true

quarkus.redis."additional-redis-clients".devservices.service-name

The value of the quarkus-dev-service-redis label attached to the started container. This property is used when shared is set to true. In this case, before starting a container, Dev Services for Redis looks for a container with the quarkus-dev-service-redis label set to the configured value. If found, it will use this container instead of starting a new one. Otherwise, it starts a new container with the quarkus-dev-service-redis label set to the specified value.

This property is used when you need multiple shared Redis servers.

Environment variable: QUARKUS_REDIS__ADDITIONAL_REDIS_CLIENTS__DEVSERVICES_SERVICE_NAME

Show more

string

redis

quarkus.redis."additional-redis-clients".devservices.container-env

Environment variables that are passed to the container.

Environment variable: QUARKUS_REDIS__ADDITIONAL_REDIS_CLIENTS__DEVSERVICES_CONTAINER_ENV

Show more

Map<String,String>

Vault

The Vault Dev Service will be enabled when the quarkus-vault extension is present in your application, and the server address has not been explicitly configured. More information can be found in the Vault Guide.

Neo4j

The Neo4j Dev Service will be enabled when the quarkus-neo4j extension is present in your application, and the server address has not been explicitly configured. More information can be found in the Neo4j Guide.

Infinispan

The Infinispan Dev Service will be enabled when the quarkus-infinispan-client extension is present in your application, and the server address has not been explicitly configured. More information can be found in the Infinispan Dev Services Guide.

Configuration property fixed at build time - All other configuration properties are overridable at runtime

Configuration property

Type

Default

quarkus.infinispan-client.devservices.enabled

If DevServices has been explicitly enabled or disabled. DevServices is generally enabled by default, unless there is an existing configuration present.

When DevServices is enabled Quarkus will attempt to automatically configure and start a database when running in Dev or Test mode and when Docker is running.

Environment variable: QUARKUS_INFINISPAN_CLIENT_DEVSERVICES_ENABLED

Show more

boolean

true

quarkus.infinispan-client.devservices.port

Optional fixed port the dev service will listen to.

If not defined, the port will be chosen randomly.

Environment variable: QUARKUS_INFINISPAN_CLIENT_DEVSERVICES_PORT

Show more

int

quarkus.infinispan-client.devservices.shared

Indicates if the Infinispan server managed by Quarkus Dev Services is shared. When shared, Quarkus looks for running containers using label-based service discovery. If a matching container is found, it is used, and so a second one is not started. Otherwise, Dev Services for Infinispan starts a new container.

The discovery uses the quarkus-dev-service-infinispan label. The value is configured using the service-name property.

Container sharing is only used in dev mode.

Environment variable: QUARKUS_INFINISPAN_CLIENT_DEVSERVICES_SHARED

Show more

boolean

true

quarkus.infinispan-client.devservices.service-name

The value of the quarkus-dev-service-infinispan label attached to the started container. This property is used when shared is set to true. In this case, before starting a container, Dev Services for Infinispan looks for a container with the quarkus-dev-service-infinispan label set to the configured value. If found, it will use this container instead of starting a new one. Otherwise, it starts a new container with the quarkus-dev-service-infinispan label set to the specified value.

This property is used when you need multiple shared Infinispan servers.

Environment variable: QUARKUS_INFINISPAN_CLIENT_DEVSERVICES_SERVICE_NAME

Show more

string

infinispan

quarkus.infinispan-client.devservices.image-name

The image to use. Note that only official Infinispan images are supported.

Environment variable: QUARKUS_INFINISPAN_CLIENT_DEVSERVICES_IMAGE_NAME

Show more

string

quarkus.infinispan-client.devservices.artifacts

List of the artifacts to automatically download and add to the Infinispan server libraries.

For example a Maven coordinate (org.postgresql:postgresql:42.3.1) or a dependency location url.

If an invalid value is passed, the Infinispan server will throw an error when trying to start.

Environment variable: QUARKUS_INFINISPAN_CLIENT_DEVSERVICES_ARTIFACTS

Show more

list of string

quarkus.infinispan-client.devservices.site

Add a site name to start the Infinispan Server Container with Cross Site Replication enabled (ex. lon). Cross Site Replication is the capability to connect two separate Infinispan Server Clusters that might run in different Data Centers, and configure backup caches to copy the data across the clusters with active-active or active-passive replication. See more about Cross Site Replication in the Infinispan Documentation https://infinispan.org/docs/stable/titles/xsite/xsite.html Configure mcast-port to avoid forming a cluster with any other running Infinispan Server container.

Environment variable: QUARKUS_INFINISPAN_CLIENT_DEVSERVICES_SITE

Show more

string

quarkus.infinispan-client.devservices.mcast-port

If you are running an Infinispan Server already in docker, if the containers use the same mcastPort they will form a cluster. Set a different mcastPort to create a separate cluster in Docker (e. 46656). A common use case in a local Docker development mode, is the need of having two different Infinispan Clusters with Cross Site Replication enabled. see https://github.com/infinispan/infinispan-simple-tutorials/blob/main/infinispan-remote/cross-site-replication/docker-compose/

Environment variable: QUARKUS_INFINISPAN_CLIENT_DEVSERVICES_MCAST_PORT

Show more

int

quarkus.infinispan-client.devservices.tracing.enabled

Runs the Infinispan Server container with tracing enabled. Traces are disabled by default

Environment variable: QUARKUS_INFINISPAN_CLIENT_DEVSERVICES_TRACING_ENABLED

Show more

boolean

false

quarkus.infinispan-client.devservices.tracing.exporter.otlp.endpoint

Sets Infinispan Server otlp endpoint. Default value is http://localhost:4317

Environment variable: QUARKUS_INFINISPAN_CLIENT_DEVSERVICES_TRACING_EXPORTER_OTLP_ENDPOINT

Show more

string

http://localhost:4317

quarkus.infinispan-client.devservices.container-env

Environment variables that are passed to the container.

Environment variable: QUARKUS_INFINISPAN_CLIENT_DEVSERVICES_CONTAINER_ENV

Show more

Map<String,String>

quarkus.infinispan-client."named-infinispan-clients".devservices.enabled

If DevServices has been explicitly enabled or disabled. DevServices is generally enabled by default, unless there is an existing configuration present.

When DevServices is enabled Quarkus will attempt to automatically configure and start a database when running in Dev or Test mode and when Docker is running.

Environment variable: QUARKUS_INFINISPAN_CLIENT__NAMED_INFINISPAN_CLIENTS__DEVSERVICES_ENABLED

Show more

boolean

true

quarkus.infinispan-client."named-infinispan-clients".devservices.port

Optional fixed port the dev service will listen to.

If not defined, the port will be chosen randomly.

Environment variable: QUARKUS_INFINISPAN_CLIENT__NAMED_INFINISPAN_CLIENTS__DEVSERVICES_PORT

Show more

int

quarkus.infinispan-client."named-infinispan-clients".devservices.shared

Indicates if the Infinispan server managed by Quarkus Dev Services is shared. When shared, Quarkus looks for running containers using label-based service discovery. If a matching container is found, it is used, and so a second one is not started. Otherwise, Dev Services for Infinispan starts a new container.

The discovery uses the quarkus-dev-service-infinispan label. The value is configured using the service-name property.

Container sharing is only used in dev mode.

Environment variable: QUARKUS_INFINISPAN_CLIENT__NAMED_INFINISPAN_CLIENTS__DEVSERVICES_SHARED

Show more

boolean

true

quarkus.infinispan-client."named-infinispan-clients".devservices.service-name

The value of the quarkus-dev-service-infinispan label attached to the started container. This property is used when shared is set to true. In this case, before starting a container, Dev Services for Infinispan looks for a container with the quarkus-dev-service-infinispan label set to the configured value. If found, it will use this container instead of starting a new one. Otherwise, it starts a new container with the quarkus-dev-service-infinispan label set to the specified value.

This property is used when you need multiple shared Infinispan servers.

Environment variable: QUARKUS_INFINISPAN_CLIENT__NAMED_INFINISPAN_CLIENTS__DEVSERVICES_SERVICE_NAME

Show more

string

infinispan

quarkus.infinispan-client."named-infinispan-clients".devservices.image-name

The image to use. Note that only official Infinispan images are supported.

Environment variable: QUARKUS_INFINISPAN_CLIENT__NAMED_INFINISPAN_CLIENTS__DEVSERVICES_IMAGE_NAME

Show more

string

quarkus.infinispan-client."named-infinispan-clients".devservices.artifacts

List of the artifacts to automatically download and add to the Infinispan server libraries.

For example a Maven coordinate (org.postgresql:postgresql:42.3.1) or a dependency location url.

If an invalid value is passed, the Infinispan server will throw an error when trying to start.

Environment variable: QUARKUS_INFINISPAN_CLIENT__NAMED_INFINISPAN_CLIENTS__DEVSERVICES_ARTIFACTS

Show more

list of string

quarkus.infinispan-client."named-infinispan-clients".devservices.site

Add a site name to start the Infinispan Server Container with Cross Site Replication enabled (ex. lon). Cross Site Replication is the capability to connect two separate Infinispan Server Clusters that might run in different Data Centers, and configure backup caches to copy the data across the clusters with active-active or active-passive replication. See more about Cross Site Replication in the Infinispan Documentation https://infinispan.org/docs/stable/titles/xsite/xsite.html Configure mcast-port to avoid forming a cluster with any other running Infinispan Server container.

Environment variable: QUARKUS_INFINISPAN_CLIENT__NAMED_INFINISPAN_CLIENTS__DEVSERVICES_SITE

Show more

string

quarkus.infinispan-client."named-infinispan-clients".devservices.mcast-port

If you are running an Infinispan Server already in docker, if the containers use the same mcastPort they will form a cluster. Set a different mcastPort to create a separate cluster in Docker (e. 46656). A common use case in a local Docker development mode, is the need of having two different Infinispan Clusters with Cross Site Replication enabled. see https://github.com/infinispan/infinispan-simple-tutorials/blob/main/infinispan-remote/cross-site-replication/docker-compose/

Environment variable: QUARKUS_INFINISPAN_CLIENT__NAMED_INFINISPAN_CLIENTS__DEVSERVICES_MCAST_PORT

Show more

int

quarkus.infinispan-client."named-infinispan-clients".devservices.tracing.enabled

Runs the Infinispan Server container with tracing enabled. Traces are disabled by default

Environment variable: QUARKUS_INFINISPAN_CLIENT__NAMED_INFINISPAN_CLIENTS__DEVSERVICES_TRACING_ENABLED

Show more

boolean

false

quarkus.infinispan-client."named-infinispan-clients".devservices.tracing.exporter.otlp.endpoint

Sets Infinispan Server otlp endpoint. Default value is http://localhost:4317

Environment variable: QUARKUS_INFINISPAN_CLIENT__NAMED_INFINISPAN_CLIENTS__DEVSERVICES_TRACING_EXPORTER_OTLP_ENDPOINT

Show more

string

http://localhost:4317

quarkus.infinispan-client."named-infinispan-clients".devservices.container-env

Environment variables that are passed to the container.

Environment variable: QUARKUS_INFINISPAN_CLIENT__NAMED_INFINISPAN_CLIENTS__DEVSERVICES_CONTAINER_ENV

Show more

Map<String,String>

Elasticsearch

The Elasticsearch Dev Service will be enabled when one of the Elasticsearch based extensions (Elasticsearch client or Hibernate Search ORM Elasticsearch) is present in your application, and the server address has not been explicitly configured. More information can be found in the Elasticsearch Dev Services Guide.

Configuration property fixed at build time - All other configuration properties are overridable at runtime

Configuration property

Type

Default

quarkus.elasticsearch.devservices.enabled

If Dev Services for Elasticsearch has been explicitly enabled or disabled. Dev Services are generally enabled by default, unless there is an existing configuration present. For Elasticsearch, Dev Services starts a server unless quarkus.elasticsearch.hosts is set.

Environment variable: QUARKUS_ELASTICSEARCH_DEVSERVICES_ENABLED

Show more

boolean

quarkus.elasticsearch.devservices.port

Optional fixed port the dev service will listen to.

If not defined, the port will be chosen randomly.

Environment variable: QUARKUS_ELASTICSEARCH_DEVSERVICES_PORT

Show more

int

quarkus.elasticsearch.devservices.distribution

Defaults to a distribution inferred from the explicitly configured image-name (if any), or by default to the distribution configured in depending extensions (e.g. Hibernate Search), or by default to elastic.

Environment variable: QUARKUS_ELASTICSEARCH_DEVSERVICES_DISTRIBUTION

Show more

elastic, opensearch

quarkus.elasticsearch.devservices.image-name

The Elasticsearch container image to use. Defaults depend on the configured distribution:

  • For the elastic distribution: docker.io/elastic/elasticsearch:8.9.1

  • For the opensearch distribution: docker.io/opensearchproject/opensearch:2.9.0

Environment variable: QUARKUS_ELASTICSEARCH_DEVSERVICES_IMAGE_NAME

Show more

string

quarkus.elasticsearch.devservices.java-opts

The value for the ES_JAVA_OPTS env variable. Defaults to setting the heap to 512MB min - 1GB max.

Environment variable: QUARKUS_ELASTICSEARCH_DEVSERVICES_JAVA_OPTS

Show more

string

-Xms512m -Xmx1g

quarkus.elasticsearch.devservices.shared

Indicates if the Elasticsearch server managed by Quarkus Dev Services is shared. When shared, Quarkus looks for running containers using label-based service discovery. If a matching container is found, it is used, and so a second one is not started. Otherwise, Dev Services for Elasticsearch starts a new container.

The discovery uses the quarkus-dev-service-elasticsearch label. The value is configured using the service-name property.

Container sharing is only used in dev mode.

Environment variable: QUARKUS_ELASTICSEARCH_DEVSERVICES_SHARED

Show more

boolean

true

quarkus.elasticsearch.devservices.service-name

The value of the quarkus-dev-service-elasticsearch label attached to the started container. This property is used when shared is set to true. In this case, before starting a container, Dev Services for Elasticsearch looks for a container with the quarkus-dev-service-elasticsearch label set to the configured value. If found, it will use this container instead of starting a new one. Otherwise it starts a new container with the quarkus-dev-service-elasticsearch label set to the specified value.

This property is used when you need multiple shared Elasticsearch servers.

Environment variable: QUARKUS_ELASTICSEARCH_DEVSERVICES_SERVICE_NAME

Show more

string

elasticsearch

quarkus.elasticsearch.devservices.container-env

Environment variables that are passed to the container.

Environment variable: QUARKUS_ELASTICSEARCH_DEVSERVICES_CONTAINER_ENV

Show more

Map<String,String>

Related content

On the same topics

Quarkus is open. All dependencies of this project are available under the Apache Software License 2.0 or compatible license.

This website was built with Jekyll, is hosted on GitHub Pages and is completely open source. If you want to make it better, fork the website and show us what you’ve got.

Navigation
Follow Us
Get Help
Languages
Quarkus is made of community projects
CC by 3.0 | Privacy Policy Sponsored by